How To Stop Automatic Repair Windows 10

When your Windows 10 computer gets stuck in an automatic repair loop, it can be a frustrating and time-consuming problem to deal with. But fear not, there are solutions to stop automatic repair and get your Windows 10 system running smoothly again.

The automatic repair feature in Windows 10 is designed to fix startup issues and other problems that prevent your computer from booting properly. However, sometimes it can get stuck in a loop, continuously trying to repair your system without success. To stop automatic repair in Windows 10, you can try a few different methods, such as accessing the advanced startup options, disabling the automatic repair feature, or running system diagnostics to identify and fix any underlying issues.

Understanding Automatic Repair in Windows 10

Automatic Repair is a built-in feature in Windows 10 that is designed to fix common issues that prevent your computer from starting up properly. When your system encounters a critical error or fails to boot, Windows 10 automatically enters into the Automatic Repair mode to diagnose and repair the problem.

In most cases, Automatic Repair can successfully resolve startup issues, but there are instances where it can get stuck in a loop or fail to fix the problem. If your computer keeps entering into Automatic Repair mode repeatedly or if the repairs don't seem to solve the underlying issue, you may need to take manual steps to stop Automatic Repair in Windows 10. In this article, we will explore various methods to disable Automatic Repair and get your system back up and running.

Method 1: Disable Automatic Repair using Command Prompt

The Command Prompt is a powerful tool that allows you to execute commands and make system changes in Windows 10. By using Command Prompt, you can disable Automatic Repair and prevent it from running on startup.

Here's how you can disable Automatic Repair using Command Prompt:

• Press the Windows key + X on your keyboard and select "Command Prompt (Admin)" from the menu.
• In the Command Prompt window, type the following command and press Enter:

bcdedit /set {default} recoveryenabled No

This command disables the Automatic Repair feature on your Windows 10 system.

To re-enable Automatic Repair in the future, simply open Command Prompt as an administrator and enter the following command:

bcdedit /set {default} recoveryenabled Yes

Method 2: Modify the Registry to Disable Automatic Repair

Another way to stop Automatic Repair in Windows 10 is by modifying the registry settings. However, it is important to note that editing the registry can be risky, and any incorrect changes can cause system instability.

Here's how you can disable Automatic Repair by modifying the registry:

• Press the Windows key + R on your keyboard to open the Run dialog box.
• Type "regedit" and press Enter to open the Registry Editor.
• In the left pane of the Registry Editor, navigate to the following path:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

In the right pane, double-click on the "SrtNoAutoReboot" DWORD value.

Change the value data to 1 and click OK. If the "SrtNoAutoReboot" value doesn't exist, you can create it by right-clicking in the right pane, selecting "New," and then choosing "DWORD (32-bit) Value." Set the name as "SrtNoAutoReboot" and set the value data to 1.

Once done, close the Registry Editor and restart your computer. Automatic Repair should no longer run on startup.

Method 3: Disable Automatic Repair from Advanced Startup Options

If you can access the Advanced Startup Options in Windows 10, you can disable Automatic Repair from there as well.

Follow these steps to disable Automatic Repair from Advanced Startup Options:

• Restart your computer and press the F8 key repeatedly before the Windows logo appears.
• On the Advanced Startup Options screen, select "Troubleshoot."
• In the Troubleshoot menu, select "Advanced options."
• Select "Command Prompt."

Once Command Prompt opens, enter the following command and press Enter:

bcdedit /set {default} recoveryenabled No

Close the Command Prompt and restart your computer. Automatic Repair should now be disabled.

Summary:

In this guide, we explored three methods to disable Automatic Repair in Windows 10. You can use the Command Prompt to enter a specific command, modify the registry settings, or access the Advanced Startup Options to turn off Automatic Repair. Remember to proceed with caution when modifying system settings or the registry, as incorrect changes can cause system instability. With these methods, you can take control of your Windows 10 startup process and stop Automatic Repair from interrupting your system.

Dealing with Automatic Repair in Windows 10

Automatic Repair is a useful feature in Windows 10 that can help fix common startup issues. However, there may be instances where you want to disable Automatic Repair or troubleshoot it when it gets stuck or fails to resolve the problem. In this section, we will explore additional methods to deal with Automatic Repair in Windows 10.

Method 4: Run System File Checker (SFC) Scan

The System File Checker (SFC) is a Windows utility that can scan for and restore corrupted system files. Running an SFC scan may help resolve issues that trigger Automatic Repair. Here's how to run an SFC scan:

• Open Command Prompt as an administrator by right-clicking on the Start button and selecting "Command Prompt (Admin)."
• In the Command Prompt window, type the following command and press Enter:

sfc /scannow

The scan may take some time to complete, and it will attempt to repair any corrupted system files it finds. Once the scan is finished, restart your computer and check if the Automatic Repair issue persists.

Method 5: Perform a Startup Repair

If Automatic Repair continues to run or if it fails to fix the issue, you can try performing a Startup Repair. Startup Repair is a Windows 10 feature that can detect and fix certain startup problems automatically.

Here's how to perform a Startup Repair:

• Boot your computer using a Windows 10 installation media (USB/DVD).
• On the Windows Setup screen, select your language preferences and click "Next."
• Click "Repair your computer" on the bottom left corner of the screen.
• In the Choose an option screen, select "Troubleshoot" and then "Advanced options."
• Select "Startup Repair" and follow the on-screen instructions.

Once the Startup Repair process is complete, restart your computer and check if the Automatic Repair issue has been resolved.

Method 6: Reset or Reinstall Windows 10

If all else fails, and you are still unable to resolve the Automatic Repair issue, you may need to consider resetting or reinstalling Windows 10.

Resetting your PC allows you to keep your personal files while reinstalling the operating system to its original state. It removes all installed applications and settings and can help resolve underlying software issues.

On the other hand, reinstalling Windows 10 performs a clean installation of the operating system, erasing all data on the system drive. This option is more suitable if you want to start fresh and remove any potential conflicts or problems.

Before proceeding with a reset or reinstall, it is crucial to back up your important files to an external storage device to prevent data loss. You may also need to create a Windows 10 installation media (USB/DVD) to perform the reset or reinstall.

Summary:

When dealing with Automatic Repair issues in Windows 10, running an SFC scan or performing a Startup Repair can help resolve the problem. If all else fails, you may need to consider resetting or reinstalling Windows 10. Remember to back up your important files before proceeding with any reset or reinstall to avoid data loss. By following these methods, you can effectively tackle Automatic Repair issues and ensure a smooth startup process.

In conclusion, Automatic Repair is a useful feature that helps Windows 10 diagnose and fix startup issues. However, there may be situations where it becomes necessary to disable or troubleshoot Automatic Repair. By following the methods described in this article, you can take control of the Automatic Repair feature and resolve any related issues without frustration or interruption.

Disable Automatic Repair in Windows 10

If your Windows 10 computer gets stuck in the automatic repair loop, preventing you from accessing your files and applications, you may want to disable the automatic repair feature. Here are two methods to help you stop automatic repair in Windows 10:

Method 1: Disable Automatic Repair using Command Prompt

1. Boot your computer from a Windows 10 installation disc or a USB drive.

2. On the installation screen, click "Next" and then click "Repair your computer."

3. Select "Troubleshoot" and then "Advanced options."

4. Choose "Command Prompt."

5. Type the following command and press Enter: bcdedit /set {default} recoveryenabled No

6. Restart your computer to apply the changes.

Method 2: Disable Automatic Repair using Registry Editor

1. Press the Windows key + R to open the Run dialog box.

2. Type "regedit" and click OK to open the Registry Editor.

3. Navigate to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WinStations\SafeOS

4. On the right-hand side, double-click on the "Enabled" value.

5. Change the value data from "1" to "0" and click OK.

6. Restart your computer for the changes to take effect.

Frequently Asked Questions

In this section, we will address some common questions about how to stop automatic repair in Windows 10.

1. How can I disable automatic repair in Windows 10?

To disable automatic repair in Windows 10, follow these steps:

1. Press and hold the power button on your computer until it shuts down completely.

2. Turn on your computer and immediately press the F8 key repeatedly before the Windows logo appears.

3. Select "Advanced options" and then choose "Troubleshoot".

4. In the Troubleshoot menu, click on "Advanced options" again.

5. Select "Command Prompt" from the list of options.

6. In the Command Prompt window, type the following command and press Enter: bcdedit /set {default} recoveryenabled No

7. Close the Command Prompt and restart your computer.

Your automatic repair feature will now be disabled in Windows 10.

2. Can I stop automatic repair without accessing Windows?

Yes, it is possible to stop automatic repair without accessing Windows. Here's how:

1. Press and hold the power button on your computer until it shuts down completely.

2. Turn on your computer and immediately press the F12 key repeatedly before the Windows logo appears.

3. This will bring up the boot options menu. Use the arrow keys to navigate to "Troubleshoot" and press Enter.

4. In the Troubleshoot menu, click on "Advanced options".

5. Select "Command Prompt" from the list of options.

6. In the Command Prompt window, type the following command and press Enter: bcdedit /set {default} recoveryenabled No

7. Close the Command Prompt and restart your computer.

3. Why does Windows 10 keep going into automatic repair?

Windows 10 may go into automatic repair mode if there are issues with your system files or configuration. It is designed to help diagnose and fix problems that prevent your computer from starting properly.

Common reasons for Windows 10 going into automatic repair include:

• Corrupted system files
• Hardware or driver issues
• Recent software or driver updates
• Incorrect system shutdown

If your computer repeatedly goes into automatic repair mode, it is recommended to troubleshoot the underlying cause to prevent further issues.

4. Can I enable automatic repair in Windows 10?

Yes, you can enable automatic repair in Windows 10 if you disabled it previously. To do this, follow these steps:

1. Press and hold the power button on your computer until it shuts down completely.

2. Turn on your computer and immediately press the F8 key repeatedly before the Windows logo appears.

3. Select "Advanced options" and then choose "Troubleshoot".

4. In the Troubleshoot menu, click on "Advanced options" again.

5. Select "Command Prompt" from the list of options.

6. In the Command Prompt window, type the following command and press Enter: bcdedit /set {default} recoveryenabled Yes

In conclusion, stopping automatic repair in Windows 10 can be done by following a few simple steps. First, try booting into safe mode and performing a system check to identify and fix any potential issues. If that doesn't work, disable automatic repair by accessing the advanced startup options and selecting the "Troubleshoot" feature. From there, choose "Advanced options" and navigate to "Startup Settings". Finally, restart your computer and select the option to disable automatic repair.

Remember, automatic repair is designed to help fix system errors, so it's important to only disable it if you have tried other troubleshooting methods and are confident in your decision. If you're unsure or experiencing persistent issues, it's always best to seek professional assistance or consult with Microsoft support to ensure the safety and stability of your Windows 10 system.