Windows

How To Mirror Windows 10 To TV

To mirror Windows 10 to a TV, connect the devices with an HDMI cable and press Windows + P, then choose Duplicate. For wireless mirroring, use Windows + K with a Miracast-compatible TV or adapter. If your TV supports Google Cast, you can share your.

Which licences fit your PC setup?

Prices are an AUD snapshot, not a live quote. Confirm variant and total on the listing.

Choose a connection your TV supports

Check the TV's manual or connection settings before starting. A smart TV may support Google Cast, Miracast, both, or neither. A screen-mirroring label alone does not tell you which method works with your PC.

Method What you need When to use it
HDMI A compatible PC video output, HDMI cable and TV HDMI input A direct connection without wireless pairing
Miracast A PC and TV or receiver that support Miracast Wireless desktop mirroring through Windows
Google Cast Chrome and a Chromecast or TV with Google Cast on the same network Sharing a browser tab or your screen

Mirroring shows the same desktop on both screens. Extending creates extra desktop space, so a successful connection may still need its display mode changed before the TV matches your laptop.

Mirror Windows 10 with an HDMI cable

HDMI carries picture and sound through one cable. If your computer lacks an HDMI output, check its specifications for a suitable video adapter. For USB-C connections, the port must support video output.

  1. Connect the cable to the PC's HDMI output and an HDMI input on the TV.
  2. Use the TV remote's Input or Source button to select the matching HDMI input.
  3. On the PC, press Windows + P and select Duplicate.
  4. Open a photo or document to check that both screens show the same content.
  5. If sound stays on the PC, open Settings > System > Sound and select the TV under Output.

HP's laptop-to-TV connection guide explains the display modes and audio selection. Keep the laptop lid open during setup so a sleep setting does not interrupt the connection.

Connect wirelessly using Miracast

Both the computer and the receiving display must support Miracast. The PC needs compatible wireless and graphics hardware and drivers. Wi-Fi must be switched on, even if the PC uses Ethernet for internet access.

Miracast can establish a direct wireless connection without a shared router. This differs from Google Cast's network requirements. Dell's Miracast guide explains compatibility and Wi-Fi Direct. Check your TV's own instructions for any additional setup requirements.

  1. Turn on the TV and enable its Miracast or wireless screen-mirroring mode. Menu names vary by manufacturer.
  2. If using a Miracast adapter, connect and power it as instructed, then select its HDMI input on the TV.
  3. On the Windows 10 PC, press Windows + K to open the connection panel.
  4. Select the TV or adapter and accept any connection request or PIN prompt.
  5. Press Windows + P and select Duplicate to show the same desktop on both screens.

These connection steps follow Microsoft's screen-mirroring instructions. To finish, open Windows + K and disconnect the display.

Use a compatible Roku as the receiver

Supported Roku devices can receive Windows screen mirroring. On the Roku, check Settings > System > Screen mirroring and choose a mode that allows a connection request. Then connect from Windows and approve the request on the TV.

Check your particular model against Roku's screen-mirroring guidance. Compatibility varies, so owning a Roku does not by itself confirm support.

Mirror your desktop through Google Chrome

Use this method with a configured Chromecast or TV with Google Cast. Connect the computer and receiver to the same Wi-Fi network and use an up-to-date Chrome browser.

  1. Turn on the TV and select the Chromecast's HDMI input if using an external device.
  2. Open Chrome on the Windows 10 PC.
  3. Open the three-dot menu and select Cast, save, and share > Cast.
  4. Choose Sources > Cast screen before selecting the TV or receiver.
  5. If prompted, select the screen to share and confirm.

Choosing Cast screen matters: casting a tab shares that tab rather than the whole Windows desktop. Desktop audio may remain on the computer. For browser video with sound on the TV, try casting the tab instead, as Google's casting instructions explain.

To stop, open Chrome's Cast control and select Stop casting.

Fix missing displays, picture problems and sound

The TV does not appear in the wireless list

Check that the TV is in its receiving mode and that you are using the matching connection method. A Google Cast receiver is found through Chrome; it does not automatically appear as a Miracast display in Windows + K.

  1. Confirm that Wi-Fi is enabled on the PC and check the TV's Miracast support.
  2. Restart the PC and TV or wireless adapter, then try connecting again.
  3. Install applicable Wi-Fi and graphics drivers from the PC manufacturer's support site, and check for TV or adapter firmware updates.
  4. For a previously paired display, open Settings > Devices > Bluetooth & other devices, select it and choose Remove device, then reconnect.

These checks are covered in Microsoft's wireless-display troubleshooting guidance. If the PC lacks Miracast support, use HDMI or a supported Google Cast setup.

The picture or audio is wrong

If HDMI shows no signal, recheck the TV input and cable connections. Try another available HDMI input or cable. If the TV shows a separate desktop, press Windows + P and choose Duplicate.

For text that is too small, open Settings > System > Display and adjust scaling. If the picture's edges are cut off, check the TV's picture-size or screen-fit setting.

For silent HDMI or Miracast playback, check Windows sound output, the TV volume and mute settings. For Google Cast, test tab casting if desktop audio stays on the PC.

Wireless delay can make mouse movement or video feel sluggish. Move the PC closer to the receiver and test again; use HDMI if the delay continues to interfere.

Prepare the desktop before sharing

Close private windows and pause notifications before showing your entire desktop. Open the file or app you intend to share so you can check text, picture size and sound together.

If you also use Windows 11 for presentations, see how to move apps from the taskbar to the desktop for shortcut setup. For separate sign-in troubleshooting, the Windows guides include opening Command Prompt from the Windows 11 lock screen.

Now connect using your chosen method and play a short clip or open your presentation to check the TV picture and sound before sharing with others.

Other editions for separate workloads

Other editions for separate workloads; prices in AUD, confirm the total on the listing.

How to check this worked

  1. Open Settings, System, Activation and confirm the edition shown.
  2. Enter the key and run activation; expect a green tick within a minute.
  3. Reboot and re-check activation survives the restart.

FAQ

What else should you know before buying?

What do I need before starting?
Read the requirements and confirm the edition first; the steps assume the machine is compatible.
How do I know the licence is genuine?
Activate on Microsoft's servers and check Settings, System, Activation. A working activation is the test.
Is this a subscription?
Keys sold here are one-time lifetime licences. Microsoft 365 plans are billed by Microsoft instead.
What if the key fails?
Email hi@ms.codes with the order number and a screenshot. Replacement or refund applies within 30 days.

Check who prepared and reviewed this guide

Written by
MS.Codes editorial
Reviewed by
Support team

Last verified: (source review; see test status above).

Recent Post