How To Fix No Internet Secured Windows 10

Are you experiencing the frustrating issue of having no internet connection on your Windows 10 device, despite being connected to a secured network? This is a common problem that can leave you feeling helpless and disconnected. But fear not, as there are effective solutions available to help you fix this issue and get back online in no time.

When it comes to fixing the "No internet secured" problem on Windows 10, understanding the root causes and taking appropriate actions is crucial. One of the common causes is incorrect network settings, which can be resolved by resetting your network configuration. Additionally, outdated network drivers can also contribute to this problem, so updating and reinstalling them might be necessary. Another possible culprit is interference from other devices or software, which can be addressed by troubleshooting and resolving any conflicts. By applying these solutions, you can restore your internet connection and ensure a smooth browsing experience on your Windows 10 device.

Understanding the Issue of "No Internet Secured" on Windows 10

Windows 10 is a popular operating system used by millions of people worldwide. However, it is not without its fair share of issues, and one common problem that users encounter is the "No Internet Secured" error. This error message typically appears when trying to connect to a wireless network, indicating that there is a problem with the network connection. While it can be frustrating, there are several troubleshooting steps you can take to fix this issue and regain your internet access.

Restart Your System and Network Devices

Before diving into complex troubleshooting steps, it's always a good idea to start with the basics. Begin by restarting your computer and the network devices, including your router or modem. Sometimes, a simple reboot can resolve temporary network issues and restore your internet connection. To do this, follow these steps:

• Click on the "Start" button and select the "Restart" option from the power menu.
• Once your computer restarts, turn off your router or modem by unplugging it from the power source.
• Wait for about 30 seconds and then plug it back in.
• Allow the router or modem to boot up completely before turning on your computer.

This simple step can often resolve minor connectivity issues and eliminate the "No Internet Secured" error.

Check Network Adapter Driver

A faulty or outdated network adapter driver can also cause the "No Internet Secured" issue on Windows 10. To fix this, you can try updating the driver to ensure compatibility with the latest network protocols and security standards. Follow these steps to update your network adapter driver:

• Press the Windows key + X on your keyboard and select "Device Manager" from the menu.
• In the Device Manager window, expand the "Network adapters" category.
• Right-click on your network adapter and select "Update driver."
• Choose the option to automatically search for updated driver software.
• If an update is available, follow the on-screen prompts to install it.

After updating the network adapter driver, restart your computer and check if the "No Internet Secured" error persists.

Disable Firewall and Antivirus

In some cases, the firewall or antivirus software installed on your system may be blocking the network connection and causing the "No Internet Secured" error. To check if this is the issue, temporarily disable the firewall and antivirus software and see if the error resolves. Follow these steps:

• Click on the Start button and navigate to the Control Panel.
• Open the Firewall or Windows Security settings.
• Disable the firewall or antivirus software temporarily.
• Attempt to connect to the network and check if the error disappears.

If disabling the firewall or antivirus software resolves the issue, it indicates that they were interfering with your network connection. In this case, you may need to adjust the settings of your firewall or antivirus software to allow the network connection.

Reset Network Settings

If the above steps do not resolve the "No Internet Secured" error, you can try resetting your network settings to their default configurations. This can help eliminate any misconfigured settings that might be causing the issue. Follow these steps to reset your network settings:

• Press the Windows key + X and select "Command Prompt (Admin)" from the menu. Alternatively, you can search for "Command Prompt," right-click on it, and choose "Run as administrator."
• In the Command Prompt window, type the following command and press Enter: netsh int ip reset
• Wait for the command to execute and then restart your computer.

After your computer restarts, check if the "No Internet Secured" error is resolved. If not, you may need to try additional troubleshooting steps.

Update Windows 10

Keeping your Windows 10 system up to date is crucial for maintaining optimal performance and resolving any known issues. Microsoft regularly releases updates that address various bugs and vulnerabilities, including network-related problems. To update Windows 10:

• Click on the Start button and select the "Settings" gear icon.
• In the Settings window, click on "Update & Security."
• Click on "Check for updates" to allow Windows to search for any available updates.
• If updates are found, follow the on-screen instructions to download and install them.
• Restart your computer after the updates are installed.

Updating Windows 10 can often fix networking issues, including the "No Internet Secured" error.

Flush DNS Cache

The Domain Name System (DNS) cache stores information about previously visited websites, and if it becomes corrupted, it can cause network connectivity problems. To resolve this, you can flush the DNS cache. Here's how:

• Open the Command Prompt as an administrator (refer to the earlier steps for opening Command Prompt as admin).
• Type the following command and press Enter: ipconfig /flushdns
• Wait for the command to execute, and then restart your computer.

Once your computer restarts, check if the "No Internet Secured" error is resolved. If not, you may need to continue troubleshooting or seek further assistance.

Investigating Advanced Network Settings

If the previous steps did not solve the "No Internet Secured" error, it may be necessary to dig deeper into your network settings and make advanced changes. Here are some additional troubleshooting steps:

Check Wireless Network Security Settings

In some cases, the wireless network's security settings may be causing the "No Internet Secured" error. Follow these steps to ensure that the security settings are correctly configured:

• Open the "Settings" app by clicking on the Start button and selecting the gear icon.
• In the Settings window, click on "Network & Internet."
• Click on "Wi-Fi" and then on "Manage known networks."
• Select your network from the list and click on "Properties."
• Ensure that the security type matches the one set on your router or modem. Common security types are WPA2-Personal or WPA3-Personal.
• Confirm that the network security key (password) is correct.

If any changes were made, click "Save" and try reconnecting to the network.

Disable IPv6

IPv6 (Internet Protocol version 6) is the most recent version of the Internet Protocol, but it may not be fully supported by all routers or ISPs. Disabling IPv6 can sometimes resolve network connectivity issues. Here's how to disable it:

• Open the "Control Panel" by clicking on the Start button and searching for "Control Panel."
• In the Control Panel window, click on "Network and Internet."
• Click on "Network and Sharing Center."
• In the left-hand pane, click on "Change adapter settings."
• Right-click on your Wi-Fi or Ethernet network connection and select "Properties."
• Scroll down and uncheck the box next to "Internet Protocol Version 6 (TCP/IPv6)."
• Click "OK" to save the changes.

After disabling IPv6, restart your computer and check if the "No Internet Secured" error persists.

Reset TCP/IP Configuration

Resetting the TCP/IP (Transmission Control Protocol/Internet Protocol) configuration can help resolve network-related issues. Follow these steps to reset the TCP/IP configuration:

• Open the Command Prompt as an administrator (refer to the earlier steps for opening Command Prompt as admin).
• Type the following command and press Enter: netsh int ip reset resetlog.txt
• Wait for the command to execute, and then restart your computer.

After restarting, check if the "No Internet Secured" error is resolved. If not, you may need to contact your ISP or seek professional help to resolve the issue.

Temporary Connectivity Workaround

If none of the previous solutions work, you can try using a temporary workaround to regain internet access while you investigate further or seek assistance. Follow these steps:

• If you have access to another Wi-Fi network or a wired Ethernet connection, try connecting to that network instead.
• If using a phone or mobile data plan with hotspot capability, you can temporarily use it to connect your computer to the internet.
• Consider using a USB wireless adapter or Ethernet adapter if your system supports it.

These workarounds can provide a temporary solution until the "No Internet Secured" error is resolved.

Conclusion

The "No Internet Secured" error on Windows 10 can be frustrating, but by following the troubleshooting steps mentioned in this guide, you can resolve the issue and regain your internet access. Start with the basics by restarting your system and network devices, then proceed with updating drivers, disabling firewall and antivirus, resetting network settings, and updating Windows 10. If the issue persists, explore advanced network settings, such as checking wireless network security settings, disabling IPv6, resetting TCP/IP configuration, or implementing temporary connectivity workarounds. Remember that seeking professional assistance or contacting your ISP may be necessary in certain situations. By taking these steps, you can overcome the "No Internet Secured" error and get back to using your Windows 10 system smoothly.

Solutions for No Internet Secured Windows 10

If you are facing the "No Internet Secured" error on your Windows 10 computer, here are some solutions you can try:

• Restart your router and modem.
• Update your Wi-Fi driver.
• Reset TCP/IP stack.
• Disable IPv6.
• Change Power Management settings for your network adapter.
• Run the Network Troubleshooter.
• Check for malware infections.
• Perform a system restore.
• Contact your Internet Service Provider (ISP) for further assistance.

If none of the above solutions work, it is recommended to consult a professional technician or IT support for further help in resolving the "No Internet Secured" issue on your Windows 10.

Frequently Asked Questions

Here are some commonly asked questions about fixing the "No Internet Secured" issue on Windows 10:

1. How can I troubleshoot the "No Internet Secured" problem on Windows 10?

To troubleshoot the "No Internet Secured" issue on Windows 10, you can follow these steps:

First, check if the problem is with your internet connection or with your device. Connect another device to the same network to determine if it is experiencing the same issue.

If the problem is isolated to your device, try restarting it. Restarting your computer can often resolve connectivity issues.

2. How do I update my network drivers on Windows 10?

To update your network drivers on Windows 10, you can follow these steps:

Open the Device Manager by pressing the Windows key + X and selecting "Device Manager" from the menu.

In the Device Manager, expand the "Network adapters" category and locate your network adapter.

Right-click on your network adapter and select "Update driver". Follow the on-screen instructions to update the driver.

3. Why is my Windows 10 showing "No Internet Secured" when my other devices have internet access?

If your Windows 10 device is showing "No Internet Secured" while your other devices have internet access, it could be due to several reasons:

One potential cause could be an issue with your network adapter drivers. Try updating the drivers as mentioned in the previous question.

Another possible cause could be conflicting network settings or a misconfiguration on your Windows 10 device. You can try resetting your network settings by going to Settings > Network & Internet > Status > Network reset.

4. What should I do if resetting the network settings doesn't resolve the issue?

If resetting the network settings doesn't resolve the "No Internet Secured" issue, you can try these additional steps:

Restart your router/modem by unplugging it from the power source, waiting for a few seconds, and then plugging it back in.

Disable any third-party antivirus/firewall software temporarily and check if the issue persists.

If none of these steps work, you may need to contact your internet service provider or consider seeking professional IT assistance.

5. Can reinstalling the network adapter fix the "No Internet Secured" problem?

Reinstalling the network adapter can sometimes resolve the "No Internet Secured" problem on Windows 10. Here's how you can do it:

Open the Device Manager by pressing the Windows key + X and selecting "Device Manager" from the menu.

In the Device Manager, expand the "Network adapters" category and locate your network adapter.

Right-click on your network adapter and select "Uninstall device". Confirm the uninstallation.

After uninstalling the device, restart your computer. Windows will automatically reinstall the network adapter upon restart.

In conclusion, if you are experiencing the "No Internet Secured" issue on your Windows 10 computer, there are several steps you can take to resolve it. First, make sure that your Wi-Fi router is functioning properly and that you have a stable internet connection. Restarting your router and modem can often solve connectivity issues.

If the problem persists, try updating your network drivers or resetting the TCP/IP stack. You can also disable IPv6 or change the security type of your network connection. Additionally, running the Network Troubleshooter or performing a System Restore to a previous point may help in resolving the issue.