Basic Troubleshooting Steps For Computer Hardware
To troubleshoot computer hardware, identify the symptom, check power and cable connections, restart if possible, and isolate the affected device. Then run the relevant diagnostics and test one change at a time. Back up important files before investigating storage faults, and use the computer’s service.
Which licences fit your PC setup?
Prices are an AUD snapshot, not a live quote. Confirm variant and total on the listing.
-

Windows 11 Pro key
$14.99 AUD
$29.00 -

Windows Server 2022 Standard
$120.00 AUD
$239.00 -

Office 2024 Pro Plus key
$20.00 AUD
$39.00
Start with checks that narrow down the fault
A freeze, blank screen or slow start does not identify a failed component on its own. Drivers, applications and external devices can produce similar symptoms. Work from simple checks towards component tests, recording what changes the behaviour.
- Record the symptom. Note whether the computer has no power, starts without a picture, stops before loading the operating system, or fails during use. Copy any error message, beep pattern or flashing-light sequence.
- Check recent changes. A new peripheral, component or driver gives you a useful starting point. Disconnect recently added external hardware and test again.
- Check external connections. Secure the power, display and peripheral cables. Inspect them for visible damage, and test with a known working, compatible cable where available.
- Restart normally if the computer responds. Save open work first. If it is completely frozen and requires a forced shutdown, unsaved work may be lost.
- Disconnect unnecessary peripherals. Leave only the equipment needed to start and use the computer, then reconnect devices individually to identify a trigger.
- Run a relevant test. Use the manufacturer’s hardware diagnostics or a suitable memory or storage test. Record the result before changing anything else.
Match the symptom to the next check
| Symptom | Check first | Next useful test |
|---|---|---|
| No lights or fan activity | Outlet, power lead, charger and desktop power switch | Try a known working outlet and compatible power lead or charger |
| Power lights appear but the screen stays blank | Monitor power, selected input and display cable | Test another cable or monitor |
| Crashes or freezes during use | Recent changes, cooling and error messages | Run memory and manufacturer diagnostics |
| Storage errors or missing boot drive | Backups and whether firmware detects the drive | Use the drive manufacturer’s diagnostic tool |
| One peripheral stops working | Its cable, power and connection | Test it on another port or computer |
Check power and display problems separately
When the computer has no power
Confirm that the wall outlet works and that any power board is switched on. On a desktop, check the power supply’s rear switch if fitted. On a laptop, check the charger connections and use a compatible charger specified for that model.
If these checks make no difference, the power supply, battery, charging circuit or motherboard may need testing. A computer that will not start does not automatically need a new power supply. Do not open a power supply unit; have a technician test it or replace it as a complete unit.
When the computer runs but shows no picture
- Check that the monitor is powered on and set to the input matching the connected cable.
- Reseat the display cable at both ends. For a desktop using a dedicated graphics card, check that the cable is connected to the intended graphics output.
- Try a known working cable or another monitor. Test the original monitor with another computer if practical.
- Record any startup beeps or diagnostic lights and look up their meaning in the model’s manual.
If a picture appears during startup but disappears when the operating system loads, investigate the display driver or settings. If Windows is accessible, this guide to a CMD command for identifying the graphics card can help establish which adapter you are troubleshooting.
Investigate crashes, overheating and memory faults
Check cooling before replacing components
Make sure vents are unobstructed and use laptops on a firm surface. Listen for unusual fan noise and check for visible dust around vents. Compare temperature readings with the manufacturer’s guidance for the specific hardware; there is no single safe temperature limit for every computer.
For internal cleaning, shut down, unplug the computer and follow its service instructions, including battery disconnection where applicable. Use appropriate dust-removal methods and keep liquids away from components. Persistent overheating or a failed fan needs attention before demanding workloads resume.
Test RAM systematically
Run the built-in or manufacturer-recommended memory diagnostic. Errors warrant investigation, but a crash alone does not prove that RAM is faulty.
- Shut down and disconnect power before touching memory modules. Follow the service manual and precautions against static electricity.
- If the memory is user-serviceable, reseat it according to the manual.
- Where the system supports it, test one module at a time in the recommended slot, repeating the same diagnostic.
- Record which module and slot produce errors. This helps distinguish a module problem from a slot or motherboard issue.
Avoid removing the CPU as a basic troubleshooting step. Check cooling and diagnostic results first. If replacement becomes necessary, confirm compatibility using the computer or motherboard documentation. A Socket rPGA 989 CPU list can provide context for that platform, but socket type alone does not establish support.
Protect files before testing storage
If a drive remains accessible but produces errors, copy important files to separate storage before running repair operations. If a hard drive clicks repeatedly, disappears intermittently or contains irreplaceable files you cannot access, stop repeated testing and consider professional data recovery.
Check whether the BIOS or UEFI detects the drive. For a serviceable desktop, inspect its data and power connections only with power disconnected. Use the drive manufacturer’s diagnostic tool to review health information. A passing result does not guarantee that a drive is healthy.
File-system repair tools address a different problem from physical drive failure. Do not treat them as a substitute for a backup or as proof that the hardware is sound.
Isolate peripheral and driver problems
For a keyboard, mouse or USB device, try another port and test the device on another computer. For missing audio, check mute, volume, the selected playback device and the headphones or speakers before suspecting the sound hardware.
In Windows, inspect Device Manager for reported errors and record the error code. Obtain drivers from the computer or component manufacturer for the exact model and operating system. If the problem began after a driver update, consider rolling it back. Change one driver at a time and retest.
Firmware updates and BIOS resets should address a specific documented issue. Follow the manufacturer’s instructions and record existing settings before changing them; these are not routine first steps for every fault.
Use the evidence to choose a repair
If the fault persists, give a technician the model, symptoms, recent changes, diagnostic codes and tests already completed. For further component guidance, browse the computer hardware guides using the part identified by your checks.
Start by recording your computer’s exact symptom, then complete the matching external check in the table before opening the case or ordering a replacement.
Other editions for separate workloads
Other editions for separate workloads; prices in AUD, confirm the total on the listing.
-

Windows 11 Home key
$18.88 AUD
$37.00 -

Windows 10 Pro key
$12.00 AUD
$15.00 -

Microsoft 365 Pro Plus, 5 devices
$15.00 AUD
$29.00
How to check this worked
- Open Settings, System, Activation and confirm the edition shown.
- Enter the key and run activation; expect a green tick within a minute.
- Reboot and re-check activation survives the restart.
FAQ
What else should you know before buying?
- What do I need before starting?
- Read the requirements and confirm the edition first; the steps assume the machine is compatible.
- How do I know the licence is genuine?
- Activate on Microsoft's servers and check Settings, System, Activation. A working activation is the test.
- Is this a subscription?
- Keys sold here are one-time lifetime licences. Microsoft 365 plans are billed by Microsoft instead.
- What if the key fails?
- Email hi@ms.codes with the order number and a screenshot. Replacement or refund applies within 30 days.
Check who prepared and reviewed this guide
- Written by
- MS.Codes editorial
- Reviewed by
- Support team
Last verified: (source review; see test status above).